The four process CNC cutting machine is an economical cutting machine for panel furniture. The machine structure is composed of four main shafts with pneumatic switching. Four different cutters can be installed to realize panel furniture cutting, punching, grooving, cabinet door milling and other processes.

四工序數控開料機的優勢：

Advantages of four process CNC cutting machine:

1.用途廣：柜體柜門兩用，對于中小型櫥柜、衣柜加工廠來說，本身產量不高，對于設備的加工效率沒有太高要求，但是希望能一機兩用，既可以做門板又可以做柜體，這樣既能提高設備利用率，又能避免花高價買設備的風險。而且自己加工門板的好處是可以自己控制加工質量和加工時間。

1. Wide use: cabinet door dual-purpose, for small and medium-sized cabinet, wardrobe processing factory, its own output is not high, for the processing efficiency of the equipment is not too high, but hope to be able to use a machine, can do both door and cabinet, so as to improve the utilization rate of equipment, and avoid the risk of expensive equipment. And the advantage of self processing door panel is that you can control the processing quality and processing time.

2.低：四工序數控開料機相對于雙工序排鉆開料機與加工排鉆開料來說，較低，對于預算不高的櫥柜、衣柜廠，能花很少的錢，就可以達到不錯的加工效果。

2. Low price: compared with the double process drilling and cutting machine and the processing center drilling and cutting center, the price of the four process CNC cutting machine is lower. For the cabinet and wardrobe factory with low budget, it can achieve good processing effect with little money.

3.操作簡單，故障率低：四工序數控開料機相對于自動換刀的加工或自動換鉆頭的排鉆開料來說，結構比較簡單，比較容易上手，故障率也低，單個主軸出故障，也不耽誤加工生產。

3. Simple operation and low failure rate: compared with the automatic tool change machining center or the automatic drill bit change drilling and cutting center, the four process CNC cutting machine has simple structure, easy to start, low failure rate, single spindle failure and no delay in processing and production.

四工序數控開料機是一款經濟型的板式家具開料機設備，機器結構由四個主軸組成，氣動切換。可以安裝四個不同的刀具，從而實現板式家具開料、打孔、拉槽，櫥柜門板銑型等工藝。

The four process CNC cutting machine is an economical cutting machine for panel furniture. The machine structure is composed of four main shafts with pneumatic switching. Four different cutters can be installed to realize panel furniture cutting, punching, grooving, cabinet door milling and other processes.

四工序數控開料機的劣勢：

Disadvantages of four process CNC cutting machine:

1、加工效率低：四工序數控開料機支持四把刀自動換刀功能。與雙工序排鉆開料機相比較，無法多鉆頭同時打孔，做柜體加工效率比雙工序排鉆低很多。四工序數控開料機柜體加工量一般為50-80張。而雙工序排鉆則是80-120張。與圓盤換刀加工相比較,換刀數量太少，如果做門板，單個門型四把刀夠用了，而面對不同客戶多種門板造型的話，四把刀數量遠遠不夠，加工效率和加工效果比木工加工低的多。

1. Low processing efficiency: four process CNC cutting machine supports automatic tool change function of four knives. Compared with the two-step row drilling and cutting machine, it is impossible to drill holes with multiple drills at the same time, and the processing efficiency of the cabinet is much lower than that of the two-step row drilling and cutting machine. The daily processing capacity of four process CNC cutting machine is generally 50-80 pieces. And the double process row drilling is 80-120 pieces. Compared with the disc tool changing machining center, the number of tool changing is too small. If the door panel is made, four knives for a single door type are enough. However, in the face of different customers with different door panel shapes, the number of four knives is far from enough, and the processing efficiency and effect are much lower than those of woodworking machining center.

2、機頭過重：因為四個主軸重量很重，對于軸伺服電機的性能要求很高。因此四工序數控開料機一般選用四個大功率6KW主軸，另外Z軸伺服電機一定要加抱閘。

2. Heavy head: because of the heavy weight of the four spindles, the performance requirements of the spindle servo motor are very high. Therefore, four high-power 6kW spindles are generally selected for the four process CNC cutting machine, and the z-axis servo motor must be equipped with holding brake.

3、質量參差不齊：市面上有五六萬的四工序設備，也有十二三萬的機器。差異非常大，這是由四工序的數控開料機的配置和生產工藝決定的。好的四工序數控開料機如果配件都采用知名企業，生產工藝都按工藝加工的話，其成本并不低。

3. The quality is uneven: there are four process equipment with a price of 50000-60000 and machines with a price of 120000-130000 on the market. The price difference is very big, which is determined by the configuration and production process of the four process CNC cutting machine. The cost of a good four process CNC cutting machine is not low if its accessories are of well-known brands and the production process is processed according to the process.